INTL 3:770/1 3:770/3
REPLYADDR bp@www.zefox.net
REPLYTO 3:770/3.0 UUCP
MSGID: fbed4d6c
REPLY: d3a6dc7a
PID: SoupGate-Win32 v1.05
Anssi Saari wrote:
> writes:
>
>> So, I guess it's bullseye.
>>
>> Where does that leave me?
>
> With the hairy script that's executed by dhcpcd and /etc/dhcpcd.conf, I
> believe. Setting a static address there isn't hard, one example is at
> https://www.tomshardware.com/how-to/static-ip-raspberry-pi
The "network preferences" dialog box shown in that link is considerably
different from, and simpler than, the dialog that comes up if I click
on the network icon > advanced options > network connnections> editing eth0...
It reveals a window with seven tabs. The defaults in the Ethernet tab
look reasonable and I can save them, but when I open the IPv4 Settings
tab it doesn't seem possible to enable the Save button even after setting
address, netmask, gateway (and routes, which seems redundant give there's
already a gateway). It looks like I've forgotten to fill something in,
but the dialog automatically check things like IP numbers and netmask
as they're typed. If I've overlooked something there's no hint what it
might be.
Is it possible that the Pi OS won't support two simultaneous network
connections? I'm out of guesses.
Thanks for writing!
bob prohaska
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/19 16/0 19/37 80/1 90/1 105/81 106/201 123/130 128/260
SEEN-BY: 129/305 142/104 153/757 7715 203/0 218/700 840 220/70 221/1
SEEN-BY: 221/6 242 360 226/17 30 100 227/114 229/110 111 112 113 200
SEEN-BY: 229/206 300 317 400 426 428 470 550 616 664 700 230/0 240/5832
SEEN-BY: 266/512 267/800 280/5003 282/1038 291/111 292/854 301/1 310/31
SEEN-BY: 320/119 219 319 2119 322/757 762 325/304 335/364 341/66 342/200
SEEN-BY: 396/45 423/81 460/58 633/280 712/848 770/1 3 100 330 340
SEEN-BY: 772/210 220 230 5020/400 5053/58 5058/104 5075/35
PATH: 770/3 1 218/840 221/6 1 320/219 229/426
|
