INTL 3:770/1 3:770/3   
   REPLYADDR bp@www.zefox.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  5e10aa9f   
   REPLY:  d315ae04   
   PID: SoupGate-Win32 v1.05   
   Knute Johnson  wrote:   
   >   
   > If you have a desktop use the NetworkManager to set your static IP.   
   > Click on the Up/Down Arrows on the -> Advanced Options -> Edit   
   > Connections, select the wired connection you want to change and then   
   > click the IPv4 tab and set a static IP address.   
   >   
   What is the path to NetworkManager? It's present if I run it   
   from the command line, but that doesn't bring up any dialogs,   
   it only reports that it's running and turns off WiFi 8-(   
      
      
      
   > If you don't have a desktop use nmtui from the command line.  It has a   
   > character interface similar to raspi-config.  If you need further   
   > instructions on nmtui, post again.   
      
   Nmtui seems closer to what I was looking for. Basically I need to   
   set a special IP, connect the bridge, log into the bridge and set   
   it up using a browser, then either set a static IP or use DHCP.   
      
   I think you've got me on the correct foot, thank you!   
      
   bob prohaska   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 19/38 90/1 105/81 106/201 128/260 129/305 135/220 225 153/757   
   SEEN-BY: 153/7715 218/700 840 220/70 226/17 30 100 227/114 229/110   
   SEEN-BY: 229/111 112 113 200 206 300 317 400 426 428 470 550 616 664   
   SEEN-BY: 229/700 266/512 267/800 282/1038 291/111 292/854 310/31 320/219   
   SEEN-BY: 322/757 342/200 396/45 460/58 633/280 281 412 418 420 509   
   SEEN-BY: 633/2744 712/848 770/1 3 100 330 340 772/210 220 230 5020/400   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 633/280 229/426