INTL 3:770/1 3:770/3
REPLYADDR knute2024@585ranch.com
REPLYTO 3:770/3.0 UUCP
MSGID: 83ce36dc
REPLY: 5e10aa9f
PID: SoupGate-Win32 v1.05
On 5/14/24 16:30, bp@www.zefox.net wrote:
> Knute Johnson wrote:
>>
>> If you have a desktop use the NetworkManager to set your static IP.
>> Click on the Up/Down Arrows on the -> Advanced Options -> Edit
>> Connections, select the wired connection you want to change and then
>> click the IPv4 tab and set a static IP address.
>>
> What is the path to NetworkManager? It's present if I run it
> from the command line, but that doesn't bring up any dialogs,
> it only reports that it's running and turns off WiFi 8-(
Do you have a desktop? A graphical display? NetworkManager is in the
upper right corner. You open it by clicking on the up and down blue
arrows. If you don't have a desktop see below:
>> If you don't have a desktop use nmtui from the command line. It has a
>> character interface similar to raspi-config. If you need further
>> instructions on nmtui, post again.
>
> Nmtui seems closer to what I was looking for. Basically I need to
> set a special IP, connect the bridge, log into the bridge and set
> it up using a browser, then either set a static IP or use DHCP.
>
> I think you've got me on the correct foot, thank you!
>
> bob prohaska
>
--
Knute Johnson
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 19/38 90/1 105/81 106/201 128/260 129/305 135/220 225 153/757
SEEN-BY: 153/7715 218/700 840 220/70 226/17 30 100 227/114 229/110
SEEN-BY: 229/111 112 113 200 206 300 317 400 426 428 470 550 616 664
SEEN-BY: 229/700 266/512 267/800 282/1038 291/111 292/854 310/31 320/219
SEEN-BY: 322/757 342/200 396/45 460/58 633/280 281 412 418 420 509
SEEN-BY: 633/2744 712/848 770/1 3 100 330 340 772/210 220 230 5020/400
SEEN-BY: 5075/35
PATH: 770/3 1 633/280 229/426
|
