INTL 3:770/1 3:770/3
REPLYADDR bulleid@ffoil.org.uk
REPLYTO 3:770/3.0 UUCP
MSGID: c3c6a986
REPLY: 8f39eb93
PID: SoupGate-Win32 v1.05
CHRS: LATIN-1 2
In message , The Natural Philosopher
writes
>I'll try and post mine somewhere. Finished it last night,. It's working
>well with two SSDS and a chip temp of around 65°C-75°C dependent on
>load.
>
Thanks
I found a suitable candidate on printables.com :
which I've modified. I've made the base 4mm thicker, which gives me
enough depth to put two countersunk holes in it so I can screw the base
down.
>Can you tweak STLs?
>
Not easily. However, in this case (!), there is the option to download
the f3d file which can be uploaded into Fusion360 and then worked on in
there.
Pi4, power supply and HDMI lead on order. I was hoping that they would
arrive today, but DHL seem to think that they would prefer to spend
their day at their local depot.
Adrian
--
To Reply :
replace "bulleid" with "adrian" - all mail to bulleid is rejected
Sorry for the rigmarole, If I want spam, I'll go to the shops
Every time someone says "I don't believe in trolls", another one dies.
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/19 15/0 16/0 19/37 80/1 90/1 105/81 106/201 123/130 128/260
SEEN-BY: 129/305 135/220 225 142/104 153/757 7715 203/0 218/700 840
SEEN-BY: 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110 111
SEEN-BY: 229/112 113 200 206 307 317 400 426 428 470 550 616 664 700
SEEN-BY: 230/0 240/5832 266/512 267/800 280/5003 282/1038 291/111
SEEN-BY: 292/854 301/1 310/31 320/119 219 319 2119 322/757 325/304
SEEN-BY: 335/364 341/66 342/200 396/45 423/81 460/58 633/280 712/848
SEEN-BY: 770/1 3 100 330 340 772/210 220 230 5020/400 5053/58 5058/104
SEEN-BY: 5075/35
PATH: 770/3 1 218/840 221/6 1 320/219 229/426
|
