INTL 3:770/1 3:770/3
REPLYADDR cl@isbd.net
REPLYTO 3:770/3.0 UUCP
MSGID: 8e0fb0d0
REPLY: 9d4f4278
PID: SoupGate-Win32 v1.05
Mike Scott wrote:
> Hi all. Two separate projects which will need a relay of some sort to
> run from a Pi or similar.
>
> I'm really looking for something plug-and-go rather than build-your-own
> (especially item 2 below)
>
> First is a dpdt relay to switch around 12-20 V at a couple of amps. spdt
> are easy to come by; the only dpdt ones I've found are on aliexpress,
> but their longevity is possibly open to question :-{
>
Try CPC (cpc.farnell.com), but you will probably need some sort of
'driver' between the Pi digital output and the relay coil.
Alternatively, as suggested here, a solid state switch or even an opto
isolator.
> Second is something to switch mains safely - a full 13A to run a 3kW
> heater. I've drawn a blank: best I can think of is to butcher one of
> those wireless mains switch modules, which would at least provide a good
> isolation gap :-)
>
Again CPC will probably have something, but again you'll need
something between the Pi and the 'whatever'.
Are there not ready made relay modules for the Pi?
--
Chris Green
·
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/19 15/0 16/0 19/37 80/1 90/1 105/81 106/201 123/130 128/260
SEEN-BY: 129/305 135/220 225 142/104 153/757 7715 203/0 218/700 840
SEEN-BY: 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110 111
SEEN-BY: 229/112 113 200 206 307 317 400 426 428 470 550 616 664 700
SEEN-BY: 230/0 240/5832 266/512 267/800 280/5003 282/1038 291/111
SEEN-BY: 292/854 301/1 310/31 320/119 219 319 2119 322/757 325/304
SEEN-BY: 335/364 341/66 342/200 396/45 423/81 460/58 633/280 712/848
SEEN-BY: 770/1 3 100 330 340 772/210 220 230 5020/400 5053/58 5058/104
SEEN-BY: 5075/35
PATH: 770/3 1 218/840 221/6 1 320/219 229/426
|
