INTL 3:770/1 3:770/3   
   REPLYADDR usenet.16@scottsonline.org.uk.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  9d4f4278   
   PID: SoupGate-Win32 v1.05   
   Hi all. Two separate projects which will need a relay of some sort to   
   run from a Pi or similar.   
      
   I'm really looking for something plug-and-go rather than build-your-own   
   (especially item 2 below)   
      
   First is a dpdt relay to switch around 12-20 V at a couple of amps. spdt   
   are easy to come by; the only dpdt ones I've found are on aliexpress,   
   but their longevity is possibly open to question :-{   
      
   Second is something to switch mains safely - a full 13A to run a 3kW   
   heater. I've drawn a blank: best I can think of is to butcher one of   
   those wireless mains switch modules, which would at least provide a good   
   isolation gap :-)   
      
   TIA for any ideas.   
      
   --   
   Mike Scott   
   Harlow, England   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/220   
   SEEN-BY: 135/225 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1   
   SEEN-BY: 221/6 360 226/17 30 100 227/114 229/110 111 112 113 200 206   
   SEEN-BY: 229/307 317 400 426 428 470 550 616 664 700 240/1120 266/512   
   SEEN-BY: 267/800 282/1038 291/111 292/854 301/1 113 812 310/31 320/219   
   SEEN-BY: 322/757 335/364 341/66 342/200 396/45 460/58 633/280 712/848   
   SEEN-BY: 770/1 3 100 330 340 772/210 220 230 5020/400 1042 5058/104   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426