home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   RBERRYPI      Support for the Raspberry Pi device      21,939 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 19,363 of 21,939   
   Bob Latham to Jesper Kaas   
   Re: How to make shares on Pi running Boo   
   05 Feb 24 12:40:43   
   
   INTL 3:770/1 3:770/3   
   REPLYADDR bob@sick-of-spam.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <5b2ded835bbob@sick-of-spam.invalid> 6aa1722b   
   REPLY:  06d5b47f   
   PID: SoupGate-Win32 v1.05   
   In article ,   
      Jesper Kaas  wrote:   
      
   > So how to either make shares in Pi visible in Windows,   
      
      
   My notes: This works for me and is well tested on bookworm.   
   Hope there are clues for you there.   
   It shares the root so you can see the lot.   
      
      
   sudo apt-get install samba samba-common-bin   
      
   sudo nano /etc/samba/smb.conf   
      
   In the [global] area make sure you have ;   
      
   workgroup = WORK GROUP   
      
   unix extensions = no   
      
      
   Comment out using # anything in [homes] even [homes] itself   
   to prevent unwanted 'pi' share. eg.   
      
   #[homes]   
   #   comment = Home Directories   
   #   browseable = no   
   #   read only = yes   
   #   create mask = 0700   
   #   directory mask = 0700   
   #   valid users = %S   
      
   Then Print$ as that too shows a share on fileBrowser iPad.   
      
   #[print$]   
   #   comment = Printer Drivers   
   #   path = /var/lib/samba/printers   
   #   browseable = yes   
   #   read only = yes   
   #   guest ok = no   
      
   Then, just above [printers] in the share definitions...   
   Add the following 14 lines...   
      
   ---------------------------------------------------   
   # The following added to share the root.   
      
   [root]   
      comment = root   
      path = /   
      writeable = yes   
      only guest = no   
      directory mask = 0777   
      create mask = 0777   
      force user = root   
      force group = root   
      public = no   
      follow symlinks = yes   
      wide links = yes   
   ---------------------------------------------------   
      
   Save back the file      Cntrl-X, Y,    
      
      
   Set the share password   
   ======================   
      
   sudo smbpasswd -a pi   
   enter password for pi user twice.   
      
   sudo systemctl restart smbd   
      
   'root' connection should now connect from a PC.   
      
      
   Done.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/225   
   SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 112 113 200 206 307 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426   
      

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca