INTL 3:770/1 3:770/3   
   REPLYADDR tnp@invalid.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  2f29fe92   
   REPLY:  0fed151b   
   PID: SoupGate-Win32 v1.05   
   On 01/02/2024 19:40, LucLan wrote:   
   > On 01.02.2024 21:31, The Natural Philosopher wrote:   
   >> On 01/02/2024 19:17, The Natural Philosopher wrote:   
   >>> Bookworm. Pi 4B   
   >>> .....   
   >>> Setting up mesa-vulkan-drivers:arm64 (23.2.1-1~bpo12+rpt3) ...   
   >>> Setting up mesa-vdpau-drivers:arm64 (23.2.1-1~bpo12+rpt3) ...   
   >>> Setting up firmware-atheros (1:20230210-5+rpt3) ...   
   >>> Setting up firmware-misc-nonfree (1:20230210-5+rpt3) ...   
   >>> Setting up linux-libc-dev:arm64 (1:6.1.73-1+rpt1) ...   
   >>> Setting up libkms++0:arm64 (0~git20231115~065257+9ae90ce-1) ...   
   >>> Setting up firmware-brcm80211 (1:20230210-5+rpt3) ...   
   >>> Setting up firmware-realtek (1:20230210-5+rpt3) ...   
   >>> Setting up raspi-firmware (1:1.20231024+ds-1+rpt5) ...   
   >>> Installing new version of config file /etc/default/raspi-firmware ...   
   >>> Installing new version of config file   
   >>> /etc/initramfs/post-update.d/z50-raspi-firmware ...   
   >>> Installing new version of config file   
   >>> /etc/kernel/postinst.d/z50-raspi-firmware ...   
   >>>   
   >>>   
   >>> and here it sits. I cant ssh into it. It's bricked itself AGAIN   
   >>>   
   >>> Last time I power cycled it, when this happened it wouldn't boot at all.   
   >>>   
   >>>   
   >>> I've plugged an HDMI screen and key board into it and it shows the   
   >>> boot sequence and something about a disk drive aborted   
   >>> journal...detected by systemd and apt-get   
   >>>   
   >>> Is there any hope or do I reinstall all over AGAIN.   
   >>>   
   >>> And how to stop it happening again.   
   >>>   
   >>>   
   >>>   
   >> It's come up with another message on the remote terminal   
   >>   
   >> sync: error syncing '/boot/firmware/LICENCE.broadcom': Input/output error   
   >>   
   >> The HDMI console is saying read error on swap device   
   >>   
   >> read error reading directory iblock 0   
   >>   
   >> On the other disk I think.   
   >>   
   >> (it has two SSDs and no SD card)   
   >>   
   >> Photo of HDMI console   
   >>   
   >> http://vps.templar.co.uk/Softwarebugs/20240201_192653.jpg   
   >>   
   >> I will leave it on as I am scared to reboot it..last time it didn't   
   >>   
   >>   
   >>   
   > for me looks like a hw error   
      
   On BOTH USB drives?   
   and ONLY when upgrading?   
      
   Hmm.   
      
   --   
   Socialism is the philosophy of failure, the creed of ignorance and the   
   gospel of envy.   
      
   Its inherent virtue is the equal sharing of misery.   
      
   Winston Churchill   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/225   
   SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 112 113 200 206 307 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426