INTL 3:770/1 3:770/3   
   REPLYADDR scott@alfter.diespammersdie.us   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <5GPuN.279785$7sbb.98048@fx16.iad> 206f0619   
   REPLY:  2bf3429c   
   PID: SoupGate-Win32 v1.05   
   In article ,   
   68g.1499 <68g.1499@etr6.net> wrote:   
   >On 1/30/24 6:05 PM, Scott Alfter wrote:   
   >> In article ,   
   >> Chris Green   wrote:   
   >>> I can't us Pi Imager because it's very broken on Ubuntu:-   
   >>   
   >> Sounds like something you should take up with the Ubuntu packagers.  I   
   >> maintain a Gentoo ebuild for rpi-imager (it's in my overlay...sudo eselect   
   >> repository enable salfter && sudo emaint sync -r salfter), and it works like   
   >> a champ.   
   >>   
   >> More recently, I've migrated my print server (an ancient RPi Model B) from   
   >> Raspbia^H^H^H^H^H^H^HRPi OS to Alpine, and it's running headless.  The   
   >> Alpine install needed to be done on a spare Raspberry Pi, but once it was up   
   >> and running with ssh access, I was able to do the rest of the setup over the   
   >> network.  Once I had it configured as I wanted it, I brought the MicroSD   
   card   
   >> over to another computer to image it and shipped the image home so I could   
   >> blast it onto an SD card.  It's a much lighter-weight system now...could put   
   >> it on a 128MB SD card, if I had one that small. :) The server runs headless,   
   >> with just two printers, a network cable, and a power supply plugged in.   
   >   
   >   
   >   Ok ... I'm not gonna ask why you'd want a completely separate   
   >   print server, based on an old Pi, rather than just printing   
   >   directly from/to whatever   :-)   
      
   The printers in question (an HP LaserJet 1320 and a Zebra LP2844) don't have   
   built-in network connectivity.  The print server is basically a   
   JetDirect-compatible box that receives print data on one port for one   
   printer and on another port for the other.  I have an actual, rather old HP   
   JetDirect print server in a box somewhere.  It's in a box because its   
   10-Mbps Ethernet on one end and USB 1.x on the other is a bit slow for   
   complex print jobs.  Fast Ethernet (100 Mbps) and USB 2.0 on the Raspberry   
   Pi is a step up.   
      
   --   
     _/_   
    / v \ Scott Alfter (remove the obvious to send mail)   
   (IIGS( https://alfter.us/         Top-posting!   
    \_^_/                            >What's the most annoying thing on Usenet?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/225   
   SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 112 113 200 206 307 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426