INTL 3:770/1 3:770/3   
   REPLYADDR bob@sick-of-spam.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <5b2a4b1189bob@sick-of-spam.invalid> 298b6795   
   PID: SoupGate-Win32 v1.05   
   I don't normally use the imager, I download the OS direct and burn it   
   using Win32 Disk Imager but I thought I should try out Rpi Imager.   
      
   I like to write notes on everything I do so I'll know next time and   
   so I tried to make notes on using Rpi Imager. Dear me.   
      
   First off I found that the OS choice menu kept changing. If you   
   selected it first then you could select any RPi OS but if you select   
   pi3 first then OS options disappear. I don't meant OS for pi 4 or pi   
   5 I'd understand that but Bookworm 32 bit lite is removed from the   
   menu. Why???  Grrr.   
      
   So I saw an option to install an OS image you have stored. I tried   
   that but it doesn't allow you to look anywhere but the C drive for   
   it, certainly not an unmapped NAS.   
      
   Is this me? Or is this tool just a bit pants?   
      
   Bob.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 15/0 16/0 19/37 80/1 90/1 105/81 106/201 123/130 128/260   
   SEEN-BY: 129/305 135/225 142/104 153/757 7715 203/0 218/700 840 220/70   
   SEEN-BY: 221/1 6 242 360 226/17 30 100 227/114 229/110 112 113 200   
   SEEN-BY: 229/206 307 317 400 426 428 470 550 616 664 700 230/0 240/5832   
   SEEN-BY: 266/512 267/800 280/5003 282/1038 291/111 292/854 301/1 310/31   
   SEEN-BY: 320/119 219 319 2119 322/757 325/304 335/364 341/66 342/200   
   SEEN-BY: 396/45 423/81 460/58 633/280 712/848 770/1 3 100 330 340   
   SEEN-BY: 772/210 220 230 5020/400 5053/58 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 1 320/219 229/426