INTL 3:770/1 3:770/3   
   REPLYADDR steveo@eircom.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <20240127150417.eb1e067174d7d956113c1f48@eircom.net> 23d8e9a9   
   REPLY:  77164509   
   PID: SoupGate-Win32 v1.05   
   On Sat, 27 Jan 2024 08:44:02 +0000   
   Andy Burns  wrote:   
      
   > You might as well get one with Klipper firmware nowadays, most printers   
   > have 300°C hotends now so can do ABS (might need a home-brewed shroud   
   > round it to keep draughts away to prevent warping).   
      
   	I'm about to get a Ratrig Vcore 3.1 (the 300mm cube size) thanks   
   to an unexpected bonus. I'll report back on it (much) later. It's on topic   
   too since it has a Pi to run the RatOS preconfigured Klipper. Not the   
   cheapest but it's a brute of a printer.   
      
   --   
   Steve O'Hara-Smith   
   Odds and Ends at http://www.sohara.org/   
   For forms of government let fools contest   
   Whate're is best administered is best - Alexander Pope   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 15/0 16/0 19/37 80/1 90/1 105/81 106/201 123/130 128/260   
   SEEN-BY: 129/305 135/225 142/104 153/757 7715 203/0 218/700 840 220/70   
   SEEN-BY: 221/1 6 242 360 226/17 30 100 227/114 229/110 112 113 200   
   SEEN-BY: 229/206 307 317 400 426 428 470 550 616 664 700 230/0 240/5832   
   SEEN-BY: 266/512 267/800 280/5003 282/1038 291/111 292/854 301/1 310/31   
   SEEN-BY: 320/119 219 319 2119 322/757 325/304 335/364 341/66 342/200   
   SEEN-BY: 396/45 423/81 460/58 633/280 712/848 770/1 3 100 330 340   
   SEEN-BY: 772/210 220 230 5020/400 5053/58 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 1 320/219 229/426