INTL 3:770/1 3:770/3
REPLYADDR tnp@invalid.invalid
REPLYTO 3:770/3.0 UUCP
MSGID: 8874bccd
REPLY: 2b445bee
PID: SoupGate-Win32 v1.05
On 09/01/2024 04:03, 57r.1283 wrote:
> Buy a pack of bubble-gum ... the foil/paper wrapper for
> each stick can be teased into its component parts. The
> ultra-thin foil is slightly sticky. Stick it all over the
> inside of the case (we used to stick 'em to school desks
> back in the day) by rubbing it on with a bit of hard wood
> or something of similar characteristics. A pencil worked
> for the school desks.
>
> Weave in a fine wire that touches both the ground plane
> of the Pi and the foil in the case. Doesn't have to be a
> super-good soldered connection.
>
> If you use WiFi then maybe leave the upper 1/3rd of the
> case un-foiled around where the WiFi antenna thingie is.
> An all-metal case would work for the static, but will
> block a lot of the WiFi signal.
>
> This should safely drain-off static charge.
You can buy adhesive backed copper foil, made for sheilding electric
guitars and similar quite cheaply - and its a cinch to solder to it to
earth it
--
“A leader is best When people barely know he exists. Of a good leader,
who talks little,When his work is done, his aim fulfilled,They will say,
“We did this ourselves.”
― Lao Tzu, Tao Te Ching
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/225
SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 226/17
SEEN-BY: 226/30 100 227/114 229/110 112 113 200 206 307 317 400 426
SEEN-BY: 229/428 452 470 550 616 664 700 240/1120 266/512 267/800
SEEN-BY: 282/1038 291/111 292/854 301/1 113 812 310/31 320/219 322/757
SEEN-BY: 335/364 341/66 342/200 396/45 460/58 633/280 712/848 770/1
SEEN-BY: 770/3 100 330 340 772/210 220 230 5020/400 1042 5058/104
SEEN-BY: 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426
|
