INTL 3:770/1 3:770/3   
   REPLYADDR address@is.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: 2bcf275c   
   PID: SoupGate-Win32 v1.05   
   Hello all,   
      
   Some time ago I found the "frame buffer interface" and was able to draw some   
   simple graphics thru it. Than I tried to enable a hardware mouse cursor,   
   but got nowhere fast :-(   
      
   So, did some searching for how enable such a mouse cursor thru the "mailbox   
   interface" and found this :   
      
   https://github.com/raspberrypi/firmware/wiki/Mailbox-framebuffer-interface   
      
   , which mentions that the "frame buffer interface" is obsolete (at least   
   since 2018).   
      
   tl;dr:   
   As the "frame buffer interface" is said to be obsolete, what is its   
   successor ?   
      
   Remark:   
   This is for a command-console only installation of Linux on an RPi 1b (no   
   GUI)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 15/0 16/0 19/10 37 80/1 90/1 105/81 106/201 123/130   
   SEEN-BY: 128/260 129/305 135/225 142/104 153/757 7715 203/0 218/700   
   SEEN-BY: 218/840 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110   
   SEEN-BY: 229/112 113 200 206 307 317 400 426 428 452 470 550 616 664   
   SEEN-BY: 229/700 230/0 240/5832 266/512 267/800 280/5003 282/1038   
   SEEN-BY: 291/111 292/854 301/1 310/31 320/119 219 319 2119 322/0 757   
   SEEN-BY: 325/304 335/364 341/66 342/200 396/45 423/81 460/58 633/280   
   SEEN-BY: 712/848 770/1 3 100 330 340 772/210 220 230 5020/400 5053/58   
   SEEN-BY: 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 1 320/219 229/426   
      
|