INTL 3:770/1 3:770/3
REPLYADDR knute2023@585ranch.com
REPLYTO 3:770/3.0 UUCP
MSGID: 7a1c13e0
REPLY: 8e1fc77e
PID: SoupGate-Win32 v1.05
Bite me
On 1/2/24 18:27, Eli the Bearded wrote:
> In comp.sys.raspberry-pi, Knute Johnson wrote:
>> Use the RPi Imager to burn your uSD card and set the WiFi there.
>
> That's not an answer to my question, which you left below because you
> don't get that top-posting is evil.
Bite me again.
> I didn't use the imager because the imager wants a newer glibc than I
> have installed on the system I'm using. Downloading an image and copying
> it an SD card is trivial for someone well-acquainted with Unix tools, so
> I didn't worry much. But I realize the imager does a bit more than
> papering over the copy process. Unfortunately all of the networking
> guides I can find for this system assume you are configuring it from a
> running system, not in advance on the disk image. "What file, where" is
> probably all the help I need. I don't want to trace the start-up process
> by reading through /etc/ to figure it out from source if I don't have to.
You got what you asked for. Quit complaining because you left out some
details.
> Elijah
> ------
> from old-school Unix
--
Knute Johnson
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/19 15/0 16/0 19/10 37 80/1 90/1 105/81 106/201 123/130
SEEN-BY: 128/260 129/305 135/225 142/104 153/757 7715 203/0 218/700
SEEN-BY: 218/840 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110
SEEN-BY: 229/112 113 200 206 307 317 400 426 428 452 470 550 616 664
SEEN-BY: 229/700 230/0 240/5832 266/512 267/800 280/5003 282/1038
SEEN-BY: 291/111 292/854 301/1 310/31 320/119 219 319 2119 322/0 757
SEEN-BY: 325/304 335/364 341/66 342/200 396/45 423/81 460/58 633/280
SEEN-BY: 712/848 770/1 3 100 330 340 772/210 220 230 5020/400 5053/58
SEEN-BY: 5058/104 5075/35
PATH: 770/3 1 218/840 221/6 1 320/219 229/426
|
