INTL 3:770/1 3:770/3   
   REPLYADDR *@eli.users.panix.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  8e1fc77e   
   REPLY:  bde8fe50   
   PID: SoupGate-Win32 v1.05   
   In comp.sys.raspberry-pi, Knute Johnson   wrote:   
   > Use the RPi Imager to burn your uSD card and set the WiFi there.   
      
   That's not an answer to my question, which you left below because you   
   don't get that top-posting is evil.   
      
   I didn't use the imager because the imager wants a newer glibc than I   
   have installed on the system I'm using. Downloading an image and copying   
   it an SD card is trivial for someone well-acquainted with Unix tools, so   
   I didn't worry much. But I realize the imager does a bit more than   
   papering over the copy process. Unfortunately all of the networking   
   guides I can find for this system assume you are configuring it from a   
   running system, not in advance on the disk image. "What file, where" is   
   probably all the help I need. I don't want to trace the start-up process   
   by reading through /etc/ to figure it out from source if I don't have to.   
      
   > On 1/2/2024 4:01 PM, Eli the Bearded wrote:   
      
   Original post is at start of thread if people need a re-fresher.   
      
   Elijah   
   ------   
   from old-school Unix   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 129/305 135/225   
   SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 112 113 200 206 307 317 400 426   
   SEEN-BY: 229/428 452 470 550 616 664 700 240/1120 266/512 267/800   
   SEEN-BY: 282/1038 291/111 292/854 301/1 113 812 310/31 320/219 322/757   
   SEEN-BY: 335/364 341/66 342/200 396/45 460/58 633/280 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 5020/400 1042 5058/104   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426