MSGID: 2:310/31.3@fidonet d701948b   
   REPLY: 2:221/1.58 54564a05   
   PID: OpenXP/5.0.36 (Linux) (x86_64)   
   CHRS: ASCII 1   
   Hello August!   
      
   On 31.03.19 at 22:48, August Abolins wrote to openxp users:   
      
    AA> I believe that I have configured OpenXP, but it just stalls after N S.   
      
    AA> Getting "Opening comm channel"   ..and nothing else happens.   
      
   That particular message can be caused by any one of a number of     
   things.   
      
   Hint:   
   ----   
   In addition to the Netcall log, which may be viewed from the "Netcall"     
   folder, OpenXP creates a debug log(debuglog.txt) in its "home"     
   directory. This contains a wealth of information but quite a bit of it     
   is in German. However, every time OpenXP is started, debuglog.txt is     
   overwritten by a new one and if you need to investigate a problem, you     
   would need to copy the existing debuglog.txt to a temporary directory     
   *before* re-starting OpenXP. To inrease the debug logging level, start     
   OpenXP with the following commandline switch: /dl:default=50   
      
   Regards,   
   Martin   
      
   --- OpenXP 5.0.36   
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)   
   SEEN-BY: 15/2 123/1970 154/10 203/0 221/0 226/17 229/107 354 426 1014   
   SEEN-BY: 240/5832 249/206 317 400 280/464 5003 292/854 310/31 317/3   
   SEEN-BY: 322/757 342/200 393/68 396/45 423/120 712/848 770/1 2452/250   
   PATH: 310/31 280/464 229/426