REPLY: 2:250/1.1 534e640f   
   MSGID: 1:3634/12.73 5c9f951f   
   PID: GED+LNX 1.1.5-b20180707   
   CHRS: CP437 2   
   TZUTC: -0400   
   TID: hpt/lnx 1.9.0-cur 07-09-15   
    On 2019 Mar 30 11:30:24, you wrote to August Abolins:   
      
    AA>> Got it.  But if some uplink systems balk at that, then Winpoint is   
    AA>> basically incompatible with those systems.   
      
    MF> Errrrrrm, not exactly :-)   
      
    MF> If the user leaves the "domain" field of their address empty during   
    MF> the initial installation, some(but not all) remote mailers will kick   
    MF> them off. I personally don't see this as an incompatibilty, I see this   
    MF> as a user error.   
      
   it is also a design flaw... it should raise a huge red error indication when   
   there is no domain listed OR (keep reading)...   
      
    MF> The "domain" field is preloaded with "fidonet" and that can be changed   
    MF> to suit "othernets" but, if for some reason, the user decides to   
    MF> delete the contents of the "domain" field, they may not realise the   
    MF> implications of doing so.   
      
   it should NOT put the @ unless there is a domain specified... so still a design   
    flaw nonetheless...   
      
   )\/(ark   
      
   Always Mount a Scratch Monkey   
   Do you manage your own servers? If you are not running an IDS/IPS yer doin' it   
   wrong...   
   ... After a trial run, it was decided to scrap the hamster chili.   
   ---   
    * Origin:  (1:3634/12.73)   
   SEEN-BY: 15/2 57/0 123/1970 153/250 154/10 203/0 221/0 226/17 229/107   
   SEEN-BY: 229/354 426 1014 240/5832 249/206 317 400 267/800 280/464   
   SEEN-BY: 280/5003 292/624 854 310/31 317/2 3 322/757 342/200 393/68   
   SEEN-BY: 396/45 423/120 712/848 770/0 1 10 100 330 340 772/0 1 500   
   SEEN-BY: 2452/250   
   PATH: 3634/12 153/7715 250 770/1 280/464 229/426