MSGID: 2:250/1.1@fidonet d65968c8   
   REPLY: 2:221/360 5c848292   
   PID: OpenXP/5.0.36 (Linux) (x86_64)   
   CHRS: ASCII 1   
   Hello August!   
      
   On 10.03.19 at 05:20, August Abolins wrote to Martin Foster:   
      
   [snip]   
    AA> I do have to confess that I ran into some confusion about:   
      
    AA> Beschreibung/Relativ Zeile = 0   
      
   After a bit of experimenting, I've figured this one out.   
      
   Normally, the area description would be on the same line as the area     
   tag but if for some reason it's on the line below the area tag, this     
   setting should be set to "1" and if it's on the second line below the     
   area tag, it should be set to "2" and so on and so forth. If it's on     
   the line above the area tag, it should be set to "-1".   
      
   Regards,   
   Martin   
      
   --- OpenXP 5.0.36   
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)   
   SEEN-BY: 1/19 15/0 2 16/0 19/36 34/999 90/1 104/57 116/18 120/544   
   SEEN-BY: 123/130 131 140 1970 153/7715 154/10 203/0 124 218/700 220/60   
   SEEN-BY: 221/0 1 222/2 226/17 229/107 426 1014 230/0 150 152 240/1120   
   SEEN-BY: 240/5832 249/206 317 400 250/1 261/38 100 1466 266/512 267/155   
   SEEN-BY: 275/100 280/464 5003 282/1031 1056 291/1 111 292/624 854   
   SEEN-BY: 310/31 317/3 320/119 219 322/757 340/400 342/13 200 393/68   
   SEEN-BY: 396/45 423/81 120 712/848 770/1 801/161 189 2452/250 3634/12   
   SEEN-BY: 5020/1042   
   PATH: 250/1 261/38 320/219 203/0 280/464 229/426