MSGID: 2:221/1.58@fidonet 1a16ddda   
   REPLY: 1:153/757.0 3170daed   
   PID: OpenXP/5.0.58 (Win32)   
   CHRS: ASCII 1   
   TZUTC: -0500   
    AA> ChatGPT said:   
      
    AA> To configure Sempoint 2.26 to use an external editor for writing or   
    AA> editing messages, follow these steps:   
      
    AA>     Select an Editor: First, make sure you have a text editor that can be   
    AA> launched from the command line, like EDIT.COM, EDIT.EXE, or any   
    AA> DOS-compatible editor of your choice.   
      
    AA>     Set Up the Editor in Sempoint:   
    AA>         Open your SEPOINT.CFG file (Sempoint's configuration file) in a   
    AA> text editor.   
    AA>         Look for a line that defines the editor setting, usually   
    AA> something like EDITOR=.   
    AA>         Specify the path to the external editor. For example:   
      
   [...]   
      
   I just checked my own /SEM dir, and although there is a     
   sempoint.cfg file, it's binary.   AI is a big fail.    :D   
      
      
      
      
   --    
     ../|ug   
      
   --- OpenXP 5.0.58   
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)   
   SEEN-BY: 90/1 103/705 105/81 106/201 124/5016 128/187 129/305 153/757   
   SEEN-BY: 153/7715 154/10 30 203/0 218/700 221/1 6 360 226/30 227/114   
   SEEN-BY: 229/110 114 206 317 400 426 428 452 470 664 700 240/1120   
   SEEN-BY: 240/5832 266/512 280/464 5003 5006 282/1038 291/111 292/854   
   SEEN-BY: 292/8125 301/1 310/31 320/219 322/757 341/66 234 342/200   
   SEEN-BY: 396/45 423/81 120 460/58 256 1124 467/888 633/280 712/848   
   SEEN-BY: 770/1 5020/400 8912 5054/30 5075/35   
   PATH: 221/1 280/464 460/58 229/426