TID: Mystic BBS 1.12 A48   
   MSGID: 1:124/5014 75d2e691   
   TZUTC: -0600   
   Ok I installed Qfront and Netserial and configured PCB connect to port 2 which   
   is where Netserial is setup for com2.  I can log on from Qfront as a user or   
   sysop and can at least get by the logon screen.   
      
   When I try to connect via telnet it connects and I see the screen :   
   PCB Prison BBS   
   QFront/PCB v1.20a with serial number   
      
   Press [ESCape] or [Tab] twice for the BBS:   
      
   Then almost immediately get the:   
      
   Thank you for calling!   
   Please wait while the BBS is loaded....   
      
   Then swiftly I get   
      
   Connection to host lost.   
      
   So is there a switch or something to give me time to press the ESCape key or    
   key?   
      
   Any help or suggestion is appreciated.   
      
   Ruben Figueroa aka Zazz   
   Mystic Prison Board Sysop   
   telnet://pbmystic.rdfig.net:24   
   Web: www.rdfig.net   
      
   --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)   
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)   
   SEEN-BY: 1/123 15/0 90/1 105/81 106/201 633 987 120/340 123/131 124/5014   
   SEEN-BY: 124/5016 129/305 153/7715 218/700 226/30 227/114 229/110   
   SEEN-BY: 229/111 112 113 114 206 307 317 424 426 428 470 550 616 664   
   SEEN-BY: 229/700 266/512 282/1038 292/854 317/3 320/219 322/757 342/200   
   SEEN-BY: 387/21 25 26 396/45 460/58 633/280 712/848   
   PATH: 124/5014 396/45 229/426