tn.wpusa.dynip.com@returns.groups.yahoo.com
n.wpusa.dynip.com@returns.groups.yahoo.com
mail.sp1.yahoo.com) (98.136.45.56)
28 Dec 2010 00:18:44 -0000
Dec 2010 00:18:44 -0000
(207.69.195.61)
helo=slamain)
are-owner@yahoogroups.com
Hi,
I've got a T42 with a DVD multi drive that reports itself as Matshita
DVD-RAM UJ-812 K104 and I'm having problems convincing cdrecord to burn
CDs with either cdrecord2 or cdrecord. I usually use cdrecord2.
I suspect the drive might be failing.
I am pretty familiar with cdrecord and use it without problems on several
other systems, so it is unlikely that I have a setup problem. While I
don't burn CDs very often on this system, I'm pretty sure that I burned a
couple CDs just a few months ago.
The drive seems to read fine, it's just writing that is an issue.=20
Cdrecord2 generates odd errors to the effect that trying to burn at low
speed on high speed media is not allowed. Cdrecord runs without errors,
but the resulting CDs are not readable.
cdrecord2 - inq reports
Cdrecord-Clone 2.01.01a04 (i386-pc-os2_emx) Copyright (C) 1995-2006 J=F7rg
Schilling scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Cannot open aspinkk$
Using libscg version 'schily-0.8'
Cannot lock buffer 65299
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-812 '
Revision : 'K104'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
I uses aspirout, so the aspinkk$ reference is expected.
The mmc2 reference looks odd. I would expect to see mmc3.
Can anyone with a T42 provide the output of
cdrecord2 -inq
cdrecord2 -prcap
cdrecord2 -atip
The last one requires a CD-RW or CD-R in the drive.
Thanks,
Steven
--=20
----------------------------------------------------------------------
"Steven Levine" eCS/Warp/DIY etc.
www.scoug.com www.ecomstation.com
----------------------------------------------------------------------
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/os2hardware/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/os2hardware/join
(Yahoo! ID required)
<*> To change settings via email:
os2hardware-digest@yahoogroups.com=20
os2hardware-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
os2hardware-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
---
* Origin: Waldo's Place USA Internet Gateway (1:3634/1000)
|
