PID: EleBBS/OS2 v20120208.d   
   MSGID: 1:229/275 00f76a17   
   REPLY: 1:105/81@fidonet 63feef10   
   TID: FastEcho 1.46.1 UNREG   
      
   * In a message originally to All, Rick Smith said:   
      
    > I got vmodem working finally... well sort of.  I can get renegade, pb 217    
    > (only) and maximus to intialize the modem no problem.  The problem I see    
    > now is that only maximus passes anything to my telnet client.  The rest    
    > all show connected but blank screen is all I get.  Because its more than    
    > one bbs software doing this I assume its some setting somewhere for modem    
    > perhaps in the setup of the bbs?   
      
   Vhat version of SIO? I am using SIO2k v2.11 I think with VX00 installed and 8    
   telnet ports and I have pretty much gotten everything to answer telnet calls    
   with both DOS and OS/2 BBS software ..    
      
   If you can't get the software to answer calls, try changing the init string to    
   just ATZ and any other hayes commands to manipulate speaker and stuff. hangup    
   string ATH answer string ATA detect RING answer on 2nd RING .. should pretty    
   much cover any situation .. at least in my experience   
      
   Good luck .. I am testing out the telnet/news/ftp server of EleBBS/2 currently    
   :D so far everything works as expected.   
      
   ---   
    * Origin: internal dimension v2 - telnet://bbs.idbbs.ca (1:229/275)   
   SEEN-BY: 1/123 15/0 90/1 105/81 106/201 114/709 123/131 129/305 153/7715   
   SEEN-BY: 218/700 226/30 227/114 229/111 112 113 206 275 307 317 400   
   SEEN-BY: 229/424 426 428 452 470 550 664 700 266/512 282/1038 317/3   
   SEEN-BY: 320/219 322/757 342/200 396/45 460/58 633/280 712/848   
   PATH: 229/275 426