From: "Andreas Ludwig"    
      
   On Wed, 27 Jul 2011 08:00:27 +0200, Lars Erdmann wrote:   
      
   >I have updated the USB host controller drivers   
   >USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS.   
   >   
   >I tried to fix hangs with USBOHCD.SYS on boot.   
      
   Hi Lars,   
      
   great progress. My workstation with a Gigabyte 770TA-UD3 and a Phenom II X6    
   finally boots with your USB drivers loaded 5xUSBOHCD and 2xUSBEHCD. This is   
   running eCS 1.2R in single core mode (albeit on SMP kernel), as I could not   
   yet get eCS 1.2R or eCS 2.1 boot in SMP mode.   
      
   Some observations:   
      
   - PS/2 mouse seems to have a problem. Cursor jumps around and scroll wheel   
   settings change (vertical to horizontal scrolling) without any obvious   
   reason, except of the new USB drivers active   
   - detaching my Canon iP4000R printer and my Lide60 scanner and reconnecting   
   to other USB ports froze the system completely. Trying it once again, I could   
   not reproduce it - things worked as expected   
   - EmperoarTV's remote control does not work any longer. It seems to need Rudi   
   Ihle'e USB driver   
      
   Other than this it seems to work well. I did not yet benchmark performance,   
   though.   
      
   Thanks a lot for your great work!!!   
   Andreas   
      
   --    
      
   Andreas Ludwig   
   Gauting, Bavaria, Germany   
   using PMINews 2 on eCS 1.2R German!   
   http://andreas-ludwig.info/   
      
      
      
      
   --- Internet Rex 2.31   
    * Origin: The gateway at Omicron Theta (1:261/20.999)