hCOKTagoX^h6B\G^CT1A^BL@[N6iTbKebAoFIT>I21in0[IF\lRS]ceI30B   
   From: "Lars Erdmann"    
      
   By the way:   
      
   does it work with the IBM 10.162 drivers ?   
   "Just before the WPS comes up": Can I therefore assume that all the RUN=    
   statements from config.sys are properly executed ?   
   (apart from the last call to PMSHELL.EXE of course)   
   If it hangs just before the WPS comes up, there is at least a good    
   indication that the drivers properly go past INIT and INIT_COMPLETE   
   which has been a persistent problem of the past.   
      
   Lars   
      
   "Doug Bissett"  schrieb    
   im Newsbeitrag news:SKfw30zmCGmZ-pn2-XLnJGI6ZJ8pn@blah.blah.com...   
   > On Sat, 23 Jul 2011 23:34:02 UTC, "Lars Erdmann"   
   >  wrote:   
   >   
   >> I have updated the USB host controller drivers   
   >> USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS.   
   >> I have now placed these on hobbes.   
   >> They will eventually make it into directory:   
   >> /pub/os2/system/drivers/misc   
   >>   
   >>   
   >> Lars   
   >   
   > I got it (not too sure which one, as both were in incoming, so I   
   > selected the latest date).   
   >   
   > On my Asus M3A78-EM machine, I got it to boot once, in eCS 2.1, using   
   > PSD=ACPI.PSD /SMP /PIC /VBE. Then, when I tried to boot again, it   
   > always hung just before the WPS should have started. Truing it with   
   > PSD=ACPI.PSD /SMP /APIC /VBE caused a trap in ACPI (3.19), when it   
   > first loaded. I then tried it in eCS 2.0, on the same machine, with   
   > PSD=ACPI.PSD /SMP /PIC /VBE, and it always hung just before the WPS   
   > should have started.   
   >   
   > Sorry, I don't have the time to more now...   
   > --    
   > From the eComStation of Doug Bissett   
   > dougb007 at telus dot net   
   > (Please make the obvious changes, to e-mail me)   
   >    
      
      
   --- Internet Rex 2.31   
    * Origin: Arcor (1:261/20.999)