hCO;>U;Vob]1o`2^CT1A^BL@[>j^k3<:ADUk6;Sn6[1W>F42HWKKU_amc@:   
   From: "Lars Erdmann"    
      
   Did the drivers work ok before the last 4 drops or so with OS2APIC.PSD ?   
   Do the original 10.162 drivers work ok with OS2APIC.PSD ?   
   Try variations of USBUHCD.SYS / USBEHCD.SYS of 10.162/my drivers   
   and report back so that I know if the problem is with USBUHCD.SYS or    
   USBEHCD.SYS.   
      
   You should also experiment with the various parameters of OS2APIC.PSD.   
   I am using OS2APIC.PSD on my test machine so in general it should work ok.   
   But your MP tables (and therefore APIC setup) might cause problems.   
      
      
      
   Lars   
      
   "Chuck McKinnis"  schrieb im Newsbeitrag    
   news:LVoCh2DsMCY6-pn2-dpdYbFyLh3Y8@chm55...   
   > On Thu, 18 Aug 2011 08:59:19 UTC, "Lars Erdmann"   
   >  wrote:   
   >   
   >> I have updated the USB host controller drivers   
   >> USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS.   
   >> I have now placed these on hobbes.   
   >> They will eventually make it into directory:   
   >> /pub/os2/system/drivers/misc   
   >>   
   >> I tried to fix problems with USBOHCD.SYS. I would be especially    
   >> interested   
   >> in usage reports for NEC OHCI HCs.   
   >>   
   >>   
   >> Lars   
   >>   
   >   
   > I keep trying on my Lenovo M55.  I am running with PSD=OS2APIC.PSD for   
   > SMP support.  None of the last 4 or so drops have let me boot   
   > successfully.   
   >   
   > [C:\os2\boot]hcimonit   
   > You have 5 PCI USB UHCI host controller(s)   
   > You have 2 PCI USB EHCI host controller(s)   
   >   
   > I have not tried switching to PSD=ACPI.PSD /SMP /APIC.  Could that be   
   > the issue?   
   >   
   > --    
   > Chuck McKinnis   
   >    
      
      
   --- Internet Rex 2.31   
    * Origin: Arcor (1:261/20.999)