Firefox/4.0.2pre SeaMonkey/2.1   
   From: Peter Brown    
      
   Hi Dariusz   
      
   Dariusz Piatkowski wrote:   
   > On Sat, 20 Aug 2011 04:19:26 UTC, "Chuck McKinnis"    
   wrote:   
   >   
   >> On Thu, 18 Aug 2011 08:59:19 UTC, "Lars Erdmann"   
   >>   wrote:   
   >>   
   >>> I have updated the USB host controller drivers   
   >>> USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS.   
   >>> I have now placed these on hobbes.   
   >>> They will eventually make it into directory:   
   >>> /pub/os2/system/drivers/misc   
   >>>   
   >>> I tried to fix problems with USBOHCD.SYS. I would be especially interested   
   >>> in usage reports for NEC OHCI HCs.   
   >>>   
   >>>   
   >>> Lars   
   >>>   
   >>   
   >> I keep trying on my Lenovo M55.  I am running with PSD=OS2APIC.PSD for   
   >> SMP support.  None of the last 4 or so drops have let me boot   
   >> successfully.   
   >>   
   >> [C:\os2\boot]hcimonit   
   >> You have 5 PCI USB UHCI host controller(s)   
   >> You have 2 PCI USB EHCI host controller(s)   
   >>   
   >> I have not tried switching to PSD=ACPI.PSD /SMP /APIC.  Could that be   
   >> the issue?   
   >   
   > Similar problem here...the last drop I tried was #11...system hangs (hard   
   hang,   
   > no CAD reset) it seems right before the Desktop is about to come up...haven't   
   > quite narrowed it down yet...I dread doing a CHDKDSK boot on my machine with   
   8   
   > HPFS partitions...lol   
   >   
   > [G:\os2\boot]hcimonit   
   > You have 5 PCI USB OHCI host controller(s)   
   > You have 2 PCI USB EHCI host controller(s)   
   >   
   > My CONFIG.SYS has the following entries:   
   >   
   > === START ====   
   > BASEDEV=USBOHCD.SYS   
   > BASEDEV=USBOHCD.SYS   
   > BASEDEV=USBOHCD.SYS   
   > BASEDEV=USBOHCD.SYS   
   > BASEDEV=USBOHCD.SYS   
   > BASEDEV=USBEHCD.SYS /S:1   
   > BASEDEV=USBEHCD.SYS /S:1   
   > BASEDEV=USBD.SYS /REQ:USBOHCD$,USBEHCD$ /V   
   > BASEDEV=USBHID.SYS /V   
   > BASEDEV=USBMSD.ADD /REMOVABLES:4 /FLOPPIES:0 /V   
   > DEVICE=G:\OS2\BOOT\USBRESMG.SYS /V   
   > === STOP ===   
   >   
   > When the freeze occurred I tried booting w/o the EHCD given my parms of   
   > /S:1...but that made no difference.   
   >   
   > ...haven't tried #12 yet though...the working drop is :   
   >   
   >   1-07-11   1:26p     42048         124  usbehcd.sys   
   >   1-07-11   1:27p     34488         124  usbohcd.sys   
   >   1-07-11   1:28p     28422         124  usbuhcd.sys   
   >   
   > ...which is stamped as 10_168   
   >   
   > Lars,   
   > Are there any specific settings we need to try to debug for you?   
   >   
   > Thanks!   
      
      
      
   I would guess that usbohcd.sys was the cause of your system failing to    
   boot when using the usbhcd11 build.   
      
   Builds 8 through 11 inclusive failed to boot here with the problem    
   resolved by reinstalling the IBM usbohcd.sys driver.   
      
   However, using usbhcd12 drivers the system is booting fine and working    
   with the only usb1 device I have - a trackball.   
      
   Regards   
      
   Pete   
      
   --- Internet Rex 2.31   
    * Origin: virginmedia.com (1:261/20.999)