bd6b22d9df269fc3b9d7.newsdawg.com   
   From: "Dariusz Piatkowski"    
      
   I am able to run my 14.105 SMP based stuff in a 4-core configuration on my new    
   MSI board...however attempting to even boot when the full 6-core setup is    
   enabled in BIOS causes the machine to hand HARD in RESOURCE.SYS, even though I    
   am still attempting to boot with just a 4-core enabled OS2 configuration   
   through   
   OS2APCI.PSD driver. Subsequently my machine currently has the 2 of the 6 cores    
   physically disabled in BIOS.   
      
   So...I'm thinking the driver is running into some problems. I have never seen    
   this before, and just about every mention of this problem I'm finding on the   
   net   
   is dealing with eCS ACPI boots...which I'm not certain I can relate to in any    
   way.   
      
   Any hints as to what may be at play here? What/where to look for the issue?   
      
   Thanks!   
      
   --- Internet Rex 2.31   
    * Origin: NewsGuy - Unlimited Usenet $19.95 (1:261/20.999)