SDgrJGWKdg8BWzhv4es+aCjVrZK6!LjzKox6qr4XIHbdk03K8eh49bJodsUqCvU6   
   neMbVshFO1h0tRKyUTd2lHE/CHZ80ow4aFX9rkiO!hqTuKw==   
   properly   
   From: "Eric Erickson"    
      
   My current T43p with eCS 2.1 is starting to have some fan issues. So I went   
   on eBay and got a similar model, figuring that I can just swap out the hard   
   drives and keep on trucking. But alas that turns out not to be the case. When   
   I put my hard drive into the new unit it boots XP just fine and all functions   
   as expected. But when I attempt to boot the eCS V2.1 partition, it starts   
   doing the JFS checks, make a loud clunk noise and then just shuts off.    
      
   The old unit is 2668-H2U and the new is 2687-D5U. The major difference is the   
   new unit is a little faster processor. I'm still doing a deep dive on the   
   specs to see what else could be different.    
      
   Any hints or thoughts on were to go? I've run the XP PC-Doctor Diags on the   
   box and it does not report any issues.   
      
   Is this a potential APCI issue or possibly just something different? I'm   
   going to try a fresh install and see if that exhibits the same issues and see   
   what install differences come out for comparision.    
      
   TIA   
   Eric Erickson   
   Elvish Software Foundry, Inc.        	- Internet:  drowelf@vnetAntiSpam.net   
   Already where I want to be Today	 - Voice/Fax: (218)-398-2625   
      
      
      
   --- Internet Rex 2.31   
    * Origin: Elvish Software Foundry, Inc. (1:261/20.999)