cee2ac53c3e39bc36826.newsdawg.com   
   From: "Dariusz Piatkowski"    
      
   Hi Lars!   
      
   On Thu, 8 Dec 2011 18:34:30 UTC, "Lars Erdmann"  wrote:   
      
   > Hallo,   
   >    
   > your report is too unspecific.   
   >    
   > Please follow the enclosed readme.txt on where to report bugs. Also:   
   > 1.) I need to know if UHCI,OHCI and/or EHCI and if it works ok with the    
   > original IBM drivers   
   > 2.) attach output from "pci.exe -D" to bug report (please attach file, don't    
   > paste the output !)   
   > 3.) create trace output (specify the correct major trace code(s) in    
   > config.sys) and attach to bug report.   
   > You do not have to set up a dump partition if you can properly   
   > boot the system (just remove VBoxDrv.sys for that). Once the system is up,    
   > run tracefmt.exe and save an UNFORMATTED trace file.   
   >    
   > Also experiment with using the original USBD.SYS and also by adding/removing    
   > the /FS switch from USBxHCD.SYS drivers.   
   >    
   > I need as much info as possible to isoltate the problem.   
   >    
   > Lars   
   >    
   >    
   > "Dariusz Piatkowski"  schrieb im Newsbeitrag    
   > news:Qg5I6Bo2seGy-pn2-GzEPvEqod0c8@neurobox...   
   > > Hi Lars!   
   > >   
   > > On Wed, 7 Dec 2011 20:02:36 UTC, "Lars Erdmann"     
   > > wrote:   
   > >   
   > >> I have updated the USB host controller drivers   
   > >> USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS, USBD.SYS   
   > >> I have now placed these on hobbes.   
   > >> They will eventually make it into directory:   
   > >> /pub/os2/system/drivers/misc   
   > >>   
   > >> For the zip file, I changed the naming scheme. It will now contain the    
   > >> build   
   > >> level version number of the drivers.   
   > >>   
   > >> Lars   
   > >   
   > > Thanks once again for the time spent working on this.   
   > >   
   > > Previously, I have been stuck on the 10.168 release...as anything beyond    
   > > this   
   > > would cause a TRAP at boot time. With this latest release I am able to    
   > > boot   
   > > completely as long as I remove the VirtualBox driver (VBoxDrv.sys) from my   
   > > CONFIG.SYS file. Leaving that driver in causes a hang right as the driver   
   > > message displays on the screen (having done the ALT-F2 hit at boot time to    
   > > list   
   > > stuff being processed).   
   > >   
   > > I am running a SMP system, using OS2APIC.PSD driver with /APIC option    
   > > here, 4   
   > > cpu-core configuration.   
   > >   
   > > Reading through the README file it sounds like a dump partition can be set    
   > > up   
   > > for a full dump...is there anything else I can do to try to narrow down    
   > > the   
   > > problem I'm seeing?   
   > >   
   > > For what it's worth, I also used the supplied USBD.SYS driver as opposed    
   > > to   
   > > relying on the IBM 10.162 version I was previously using. I assume it's OK    
   > > to do   
   > > so? Didn't see anything in the README that touched upon this...   
   > >   
   > > Next task: hook up the DSLR and do some xfers of data over that USB    
   > > link...   
      
   No longer an issue...I've moved on to 177 release because I can finally boot    
   with this one. Update posted to the 177 specific thread...   
      
   Thanks!   
      
   --- Internet Rex 2.31   
    * Origin: NewsGuy - Unlimited Usenet $19.95 (1:261/20.999)