From: "Frank Beythien"    
      
   On Mon, 3 Jan 2011 18:26:08 UTC Dave Yeo  wrote:   
      
   > Lars Erdmann wrote:   
   > > Hallo,   
   > >   
   > > if you have this (onboard) I/O controller from Intel:   
   > > "Intel® 82801DB I/O Controller Hub 4 (ICH4)"   
   > >   
   > > or NEWER (that would be ICH5, ICH6, ICH7 etc.):   
   >    
   > My old computer died and now have a 5 yr old P4 with   
   > Device 27CCh N10/ICH 7 Family USB2 EHCI Controller   
      
   That is the one on my Fujitsu / Siemens board   
       
   > >   
   > > can you please check and report back if in your BIOS settings you have   
   > > something like this:   
   > > 1.) "USB enable/disable wakeup" or "USB resume enable" or "UHCI resume   
   > > enable" or the like ?   
   >    
   > The BIOS has "S3 resume by USB devices" enable/disable under power    
   > management.   
      
   The Phoenix BIOS has no settings for resume, only selection of support   
   for USB keyboard / mouse / all devices and  USB 1.1 or 2.0.   
       
   > > 2.) if yes, can you even configure this setting SEPARATELY for   
   > > "port1"/"port2"   
   > > (or "port0"/"port1" or "root port1"/"root port2" or the like) ?   
       
   No   
      
   CU/2   
   --    
   Frank Beythien   fBeythien AT gmx.de   
      
   --- Internet Rex 2.31   
    * Origin: The gateway at Omicron Theta (1:261/20.999)