Firefox/4.0b8pre SeaMonkey/2.1b2pre   
   hCOKHnGLZ]_FkNN^CT1A^BL@[NdJ77LFlBibJg7[MX\YkFeOUXRn]`hIl0I   
   From: Lars Erdmann    
      
   Do you have RSJ >= 6.03 and have tried it the "USB" way ?   
   If you have a OS2CDROM.DMD version >= 10.157, read instructions on how to   
   set it up the "USB" way ("USB-Info").   
   Note: It is NOT necessary to have a USB cd-rom drive for this to work.   
      
   The only relevant RSJ statements I have in config.sys:   
      
   IFS=D:\PROGRAMS\RSJ\CDWFS.IFS   
   BASEDEV=DANIS506.ADD   
   BASEDEV=DANIATAP.FLT /RSJ   
   RUN=D:\PROGRAMS\RSJ\CDWFSD.EXE -p "D:/VAR/TEMP" -c200000 -b32768 -t2 -i3 -s0   
      
   and NOTHING else.   
      
      
   Alternatively, I would try and specify multiple "-i:" Parameters on the   
   LOCKCDR.FLT   
   command line.   
      
      
   Lars   
      
   tholen@antispam.ham wrote:   
   > I'm trying to configure RSJ for use in a multi-burner environment.   
   > Things were fine up until recently, when I replaced an old drive   
   > with a Plextor 870A.  If I let LOCKCDR.FLT do its thing as in the   
   > past, all the drives will be recognized by RSJ and converted into   
   > drives that RSJ can use.  The problem is that the autodetect   
   > function for the new Plextor drive sets it up for CUESHEET DAO mode,   
   > which doesn't work right.  If I edit the cddrv.inf file and change   
   > the DAO mode to RAW-3, then the Plextor drive works properly.   
   > However, apparently I need to modify CONFIG.SYS to get LOCKCDR.FLT   
   > to use the new entry in the cddrv.inf file.  My CONFIG.SYS entry is   
   >   
   > BASEDEV=LOCKCDR.FLT -d -n -v -i:"PLEXTOR DVDR   PX-870A "   
   >   
   > So now everything works on the Plextor, but the problem is that RSJ   
   > doesn't recognize the other drives.  If I add additional lines to   
   > CONFIG.SYS similar to the above but for each of the other drives,   
   > then I see three sets of output during the boot process, with the   
   > drives not listed in the -i section being ignored.   
   >   
   > Anybody out there using RSJ with multiple drives, one of them being   
   > manually configured with cddrv.inf?  If so, how are you doing it?   
   >   
      
      
   --- Internet Rex 2.31   
    * Origin: Arcor (1:261/20.999)