Firefox/4.0b8pre SeaMonkey/2.1b2pre   
   ooglegroups.com>   
   hCOkekOe3U[k;Eb^CT1A^BL@[nW7WllBZAEhmlXIWb9kB@>hSFjL9U^F>Vh   
   3d9f8c56   
   From: Lars Erdmann    
      
   Since you are using USBUHCD.SYS and USBEHCD.SYS:   
      
   1.) I am currently working on USBUHCD.SYS about the handover from legacy to   
   native support.   
        This seems to be the issue you are struggling with.   
        What type is the USB KVM switch ? Is it EHCI (USB 2.0) ?   
   2.) USBEHCD.SYS ia also in the works, just like USBOHCD.SYS.   
      
   It'll take until end of January until I have something new to present.   
      
   Lars   
      
   Blonde Guy wrote:   
   > I am trying each release of the USB host controller drivers on an IBM   
   > ThinkCentre S51. With eCS 2.0, this machine had very little USB   
   > capability. At best it could operate the USB mouse and keyboard for a   
   > few seconds. I enabled legacy mouse and keyboard for the machine and I   
   > can use USB mouse and keyboard with it, but nothing else works.   
   >   
   > I've created bug report on the eComStation bug tracker here.   
   >   
   >   http://bugs.ecomstation.nl/view.php?id=2651   
   >   
   > Now with USBxHCD 3, the behavior with legacy enabled is unchanged; the   
   > USB mouse and keyboard do not work. Turning off legacy allows mouse   
   > and keyboard to work, same as with usbxhcd2. Plugging in a thumb drive   
   > now causes the machine to hang. This is new with usbxhcd3.   
   >   
   > With legacy on, using the USB KVM switch will hang the computer. With   
   > legacy off, using the USB KVM switch works.   
      
      
   --- Internet Rex 2.31   
    * Origin: Arcor (1:261/20.999)