EK]N]G;2>V^?kWC5nG\Kji_U1JZH3SLdOjFmK0O]kRogI0fF   
   From: "Paul Smedley"    
      
   Hi Rich,   
      
   On Sat, 11 Dec 2010 22:11:38 UTC, "Rich Walsh"    
    wrote:   
      
   > On Sat, 11 Dec 2010 21:19:16 UTC, "Paul Smedley"  wrote:   
   > > On Sat, 11 Dec 2010 10:37:43 UTC, Lars Erdmann    
   wrote:   
   > > > Paul Smedley wrote:   
   > > > >   
   > > > > Tried these briefly today - system boots fine, however Cameraderie   
   > > > > can't download photos - it reports "Unable to initialize camera".   
   > > > >   
   > > > > usbresmg.sys can still see the attached devices, just doesn't seem to   
   > > > > be able to talk to the camera :(   
   > > >    
   > > > Is the camera USB 2.0 (in other words: is it served by USBECHD.SYS) ? It   
   > > > seems that most of the problems come from USBEHCD.SYS.   
   > >   
   > > Yes it is.   
   >    
   > I tried this and got the same error with updated versions of USBEHCD.SYS.   
   > Using the IBM version with Lars' USBUHCD.SYS, it worked.  I then remmed-out   
   > USBEHCD and restarted so it would have to go through USBUHCD.  That failed   
   > too, but at an earlier point.   
   >    
   > With EHCD, Cam can configure the device at the USB level but its first   
   > command to the camera using the PTP protocol fails.  USBRESMG returns   
   > an error code but it's undocumented (no surprise there).  With UHCD,   
   > Cam's attempt to set the USB configuration fails (it times out).   
   >    
   > Other classes of USB 2.0 devices such as MSD and HID work OK, so the problem   
   > may be in USBRESMG.  Paul, can you test this using TAME?   
      
   Unfortunately not, the only scanner I have here is not supported by    
   Sane.  One day I'll try get the Epson opensource scanner drivers    
   working with it, but for now it can scan to SD which is fine by me.   
      
      
   --    
   Cheers,   
      
   Paul.   
      
   --- Internet Rex 2.31   
    * Origin: Unlimited download news at news.astraweb.com (1:261/20.999)