TID: Mystic BBS 1.12 A48   
   MSGID: 2:250/5 1ec2287f   
   TZUTC: 0000   
   Hi g00r00,   
      
   When using ansi files larger than standard 80x25, and wanting to use display   
   codes like the !UH (pipe not !) I can do that fine, but if I want to use the   
   justification display codes, like $C or $L or $R they only accept two digit   
   widths, however I need to use three digit widths, i.e. !$C122 - what actually   
   happens is it just does !$C12 and prints the 2 at the start of whatever string   
   I'm trying to centre.   
      
   Any chance of the display codes for left/right/center justify being allowed to   
   use 2 or 3 digits?   
      
   Also this is the same for cursor positioning too i.e. [X99 is the farthest   
   right I can go, and I can't do [X100 - [X132   
      
   Thanks muchly!   
      
   --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)   
    * Origin: thE qUAntUm wOrmhOlE, rAmsgAtE, uK. bbs.erb.pw (2:250/5)   
   SEEN-BY: 1/120 123 15/0 18/0 25/0 90/1 105/81 106/201 114/705 116/116   
   SEEN-BY: 120/340 616 123/0 10 25 115 120 131 180 200 525 755 3001   
   SEEN-BY: 129/215 305 135/300 153/757 7715 154/10 30 40 50 700 218/700   
   SEEN-BY: 218/840 220/70 90 221/6 222/2 226/17 18 30 100 227/114 201   
   SEEN-BY: 229/110 111 112 113 206 275 310 317 400 424 426 428 452 470   
   SEEN-BY: 229/550 664 700 240/1120 250/0 1 2 3 4 5 6 8 11 12 263/0   
   SEEN-BY: 263/5 266/512 267/800 275/1000 280/464 282/1038 292/854 298/25   
   SEEN-BY: 299/6 300/4 301/1 305/2 3 317/3 320/219 322/757 342/200 396/45   
   SEEN-BY: 460/58 467/4 633/280 712/848 1321 770/1 2320/105 3634/0 12   
   SEEN-BY: 3634/15 27 50 56 57 119 5020/1042   
   PATH: 250/5 1 3634/12 154/10 770/1 317/3 229/426