TID: Mystic BBS 1.12 A48   
   MSGID: 1:142/104 311d219c   
   REPLY: 3:770/100 86dcc066   
   TZUTC: -0400   
   On 21 Oct 2022, Paul Hayton said the following...   
       
    PH> On 18 Oct 2022 at 07:18p, Clive Reuben pondered and said...   
    PH>     
    PH>  CR> -------->> start concerning entries <<------------   
    PH>  CR> 2022.10.18 13:36:06 Executing: sh /mystic/temp2/xfer.sh   
    PH>  CR> 2022.10.18 13:36:06 Execution complete: 32512   
    PH>  CR> -------->> end concerning entries <<--------------   
    PH>    
    PH> Here we go, found it. It's mentioned in whatsnew.txt from back in the   
    PH> development of 1.08   
    PH>    
    PH> [snip]   
    PH>    
    PH> + Added the ability to execute an MPL program instead of the command line   
    PH>    for a protocol.  By starting your command line with a !, you can have   
    PH>    Mystic run a MPE program.  For example:   
    PH>    
    PH>        send Command: !test %1 %2 %3   
    PH>    
    PH>    The above would execute test.mpe from your scripts directory and pass   
    PH>    the results of the %1 %2 %3 protocol MCI codes as command parameters   
    PH> to    the MPL program.  Keep in mind that if you do use this to execute   
    PH> some    type of protocol, you must set the DSZLOG environment variable   
    PH> yourself    and have it point to the current node's temp directory as   
    PH> xfer.log.  Mystic    will also create an xfer.bat or xfer.sh (depending   
    PH> on operating system) which   
    PH>    can also be executed.   
      
   Ok... So, it really is just a normal system function then? I could not find it   
   anywhere else in the logs and couldn't recreate it... Thanks, very much for   
   letting me know!!! Much appreciated!   
      
   |07-|15seeLive|08Ä|15{ "|07Sysop|15": ["|07oNyX bBs|15"] }   
      
    |15onyxbbs.mywire.org:2300-tel / :2200-ssh / onyxwww.mywire.org-web   
         |07fsxnet / fidonet / tqwnet / dovenet / gamenet / sfnet|14   
      
   --- Mystic BBS v1.12 A48 2022/07/15 (Raspberry Pi/32)   
    * Origin: oNyX bBs - onyxbbs.mywire.org:2300/2200 (1:142/104)   
   SEEN-BY: 1/19 123 15/0 16/0 19/37 80/1 90/1 105/81 106/201 120/340   
   SEEN-BY: 123/130 131 129/305 142/104 799 153/7715 203/0 218/700 221/0   
   SEEN-BY: 226/30 227/114 229/110 111 112 113 206 275 317 400 424 426   
   SEEN-BY: 229/428 452 470 550 664 700 240/5832 266/512 282/1038 292/854   
   SEEN-BY: 317/3 320/119 219 319 322/0 757 325/304 342/200 396/45 460/58   
   SEEN-BY: 633/280 712/848   
   PATH: 142/104 320/219 229/426