TID: Mystic BBS 1.12 A48   
   MSGID: 1:134/303 b2fed22d   
   REPLY: 1:129/215 9a043a1e   
   TZUTC: -0600   
    g0> If you run a "ldconfig -p | grep libpython" what do you see?   
      
   libpython3.9.so.1.0 (libc6,hard-float) => /lib/arm-linux-gnueabi   
   f/libpython3.9.so.1.0   
      
   libpython3.9.so (libc6,hard-float) => /lib/arm-linux-gnueabihf/libpython3.9.so   
      
   libpython3.8.so.1.0 (libc6,hard-float) =>   
   /lib/arm-linux-gnueabihf/libpython3.8.so.1.0   
      
   libpython3.8.so (libc6,hard-float) => /lib/arm-linux-gnueabihf/libpython3.8.so   
      
   libpython2.7.so.1.0 (libc6,hard-float) =>   
   /lib/arm-linux-gnueabihf/libpython2.7.so.1.0   
      
    g0> I'll see if I can find a way to get access to Bullseye so I can test and   
    g0> get the Wiki updated with any findings (I just noticed I haven't updated   
    g0> the Wiki with notes since the 2.7 release).   
      
   Any advice you're able to offer is much appreciated. For the time being I'm   
   able to make do with Python 2.7. I'm just more familiar with 3 so I wanted to   
   give it a shot.   
      
   Thank you for your reply!   
      
   ... DOS=HIGH?  I knew it was on something...   
      
   --- Mystic BBS v1.12 A48 2022/03/11 (Raspberry Pi/32)   
    * Origin: CaNerDUH BBS (1:134/303)   
   SEEN-BY: 1/123 15/0 90/1 105/81 106/201 114/705 120/340 123/120 131   
   SEEN-BY: 129/305 330 331 134/0 100 101 303 153/105 757 7083 7715 154/10   
   SEEN-BY: 218/700 840 220/70 221/6 226/17 30 100 227/114 229/110 206   
   SEEN-BY: 229/307 317 400 424 426 428 452 550 664 700 240/5832 250/5   
   SEEN-BY: 250/8 266/512 267/800 280/464 282/1038 292/854 298/25 301/1   
   SEEN-BY: 305/2 3 317/3 320/219 322/757 342/200 396/45 460/58 633/280   
   SEEN-BY: 712/848 770/1   
   PATH: 134/303 101 100 153/757 221/6 218/840 770/1 317/3 229/426