TID: Mystic BBS 1.12 A48   
   MSGID: 1:342/200 8852c008   
   REPLY: 1:129/215 bcf45254   
   TZUTC: -0700   
   On 07 Mar 2022, g00r00 said the following...   
       
    g0>  IJ> Is there a way to get an ANSI file to pause for 1 or 2 seconds at the   
    g0>  IJ> end, after its been displayed without user input??   
    g0>    
    g0> There are a couple of ways the easiest in most cases is to use the |DE   
    g0> mci code which delays for half a second.  So if you want to pause for 2   
    g0> seconds just put 4 |DE mci codes at the end of the file.   
    g0>    
      
   Okay I have been playing with this and cannot seem to get it to work...  So,   
   at the end of the file I add "4 |DE" to delay for 2 seconds  or "20 |DE" to   
   delay for 10 seconds... all this without the quotes.   
      
   Thanx   
      
   IB Joe   
   AKA Joe Schweier   
   SysOp of Joe's BBS   
   -=JoesBBS.com=-   
      
   ... Reward for a job well done: More work   
      
   --- Mystic BBS v1.12 A48 2022/02/09 (Windows/64)   
    * Origin: JoesBBS.Com, Telnet:2323 SSH:2222 HTTP:80 (1:342/200)   
   SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 129/305 330   
   SEEN-BY: 129/331 153/7715 218/700 226/30 227/114 229/110 206 307 317   
   SEEN-BY: 229/400 424 426 428 452 550 664 700 240/5832 266/512 282/1038   
   SEEN-BY: 292/854 301/1 317/3 320/219 322/757 342/200 396/45 460/58   
   SEEN-BY: 633/280 712/848   
   PATH: 342/200 229/426