TID: Mystic BBS 1.12 A48
MSGID: 1:129/215 d9422dbb
REPLY: 1:135/393 4c3f6c94
TZUTC: -0500
 MD> I believe I saw in a video from Avon that the routing info should read:
 MD> 1* 2* 3* 4*

Avon's videos are a bit outdated in terms of routing, but in general the same
system exists today.  You shouldn't need to do anything in your routing for
Netmails to be routed through the network.

 MD> I tried to send a netmail to someone other than my hub.  The netmail did
 MD> not go direct to the address, but went to the hub.

The mail will not go direct to the node if they are not configured to go
direct.  It will route through the network and get sent to the receiver's node.

 MD> The hub asked me to change the setting to:
 MD> 1:* 2:* 3:* 4:* and it still didn't go through.

What this is doing is saying that you want all netmail addressed to zones
1,2,3,4 (IE all of FidoNet) to be sent to this node.  It sounds like you don't
want that at all.

... When all else fails, read the instructions

--- Mystic BBS v1.12 A48 2022/02/17 (Windows/32)
 * Origin: Sector 7 * Mystic WHQ (1:129/215)
SEEN-BY: 1/120 123 14/5 15/0 18/0 50/109 80/1 90/1 92/1 103/705 105/81
SEEN-BY: 106/201 116/116 120/340 616 123/0 10 25 115 131 180 200 755
SEEN-BY: 129/215 305 330 331 135/300 153/7715 154/10 30 40 50 700
SEEN-BY: 218/700 220/90 221/1 6 222/2 226/18 30 227/114 201 229/110
SEEN-BY: 229/206 307 310 317 400 424 426 428 452 550 664 700 240/1120
SEEN-BY: 240/5832 250/1 266/512 275/1000 280/464 282/1038 292/854
SEEN-BY: 299/6 300/4 301/1 113 317/3 320/219 322/757 335/364 341/66
SEEN-BY: 342/200 396/45 460/58 467/888 633/280 640/1321 712/848 2320/105
SEEN-BY: 3634/0 12 15 27 50 119 5000/111 5001/100 5005/49 5020/715
SEEN-BY: 5020/830 1042 2047 2140 4441 5053/51 5054/8 5058/104 5064/56
SEEN-BY: 5080/102 5083/1 444 5090/958
PATH: 129/215 154/10 3634/12 5020/1042 301/1 229/426