TID: Mystic BBS 1.12 A47   
   MSGID: 1:267/157 e2da7a91   
   REPLY: 1:153/7083 b3a66477   
   TZUTC: -0500   
   On 19 Nov 2021, Edmund Wong said the following...   
       
    EW>    
    EW> I'm still trying to figure it out.  If I set in the configuration to use   
    EW> CP437, the ansi is ok.  But when I log in via ssh/telnet, I need to set   
    EW> the terminal program to use CP437 as well.   However, the ANSI is still   
    EW> screwed up regardless of which setting you use when you log in using   
    EW> netrunner (nr21 version).   
      
   The issue you are having is easily fixed by going into Configuration then   
   General settings and choosing CP437 as your local code page, also set it to   
   CP437 in Login/Matrix as the default codepage.. My issue was more of a Linux   
   Issue and I solved it.. Is what I said correct g00r00??    
      
   AL   
      
   ... As I said before, I never repeat myself   
      
   --- Mystic BBS v1.12 A47 2021/11/06 (Windows/32)   
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)   
   SEEN-BY: 1/123 90/1 105/81 114/705 120/340 123/120 131 129/305 154/10   
   SEEN-BY: 218/840 220/70 226/17 30 100 227/114 702 229/101 424 426   
   SEEN-BY: 229/428 452 550 664 700 981 240/5832 249/206 307 317 400   
   SEEN-BY: 250/5 8 267/118 150 156 157 310 585 800 282/1038 292/854   
   SEEN-BY: 298/25 301/1 305/2 3 317/3 322/757 340/1000 342/200 633/280   
   SEEN-BY: 770/1   
   PATH: 267/157 800 770/1 317/3 229/426