TID: Mystic BBS 1.12 A47
MSGID: 1:129/215 51f28c3a
REPLY: 1:153/7083 b3a66477
TZUTC: -0500
 EW> I'm still trying to figure it out.  If I set in the configuration to use
 EW> CP437, the ansi is ok.  But when I log in via ssh/telnet, I need to set
 EW> the terminal program to use CP437 as well.   However, the ANSI is still
 EW> screwed up regardless of which setting you use when you log in using
 EW> netrunner (nr21 version).

Are you using the default ANSIs or have you created new ones?  Some of this
could depend on how the ANSIs are saved.

There are three settings for character translation, one for the local UI and
two used for each user when a connection is established.

The local UI setting is in System Configuration> General settings.  When
Mystic is installed it should give you a quiz so it can determine what that
setting should.  When you run "./mystic -l" (make sure you have the -l) the
ANSI should look normal.  If it does not, try changing it.

The second settings are in the Login/Matrix setting.  The "default codepage"
setting is what Mystic defaults to for each user that connects.  Almost always
you'll want this set to CP437.  Then there is the "Ask Codepage" setting which
can be set to "Detect" "Ask" or a specific codepage.  You can try setting that
to Ask to experiment with it but you can probably keep it on Detect unless you
are having issues.

... Light year: 1/3 less calories than your regular year

--- Mystic BBS v1.12 A47 2021/11/18 (Windows/64)
 * Origin: Sector 7 * Mystic WHQ (1:129/215)
SEEN-BY: 1/123 90/1 105/81 114/705 120/340 457 616 123/10 120 131
SEEN-BY: 129/215 305 154/10 30 40 50 700 203/0 218/840 220/70 80 90
SEEN-BY: 221/6 226/17 18 30 100 227/114 201 702 229/101 310 424 426
SEEN-BY: 229/428 452 550 664 700 981 240/5832 249/206 307 317 400
SEEN-BY: 250/5 8 267/800 280/464 282/1038 292/854 298/25 301/1 305/2
SEEN-BY: 305/3 317/3 322/757 340/1000 342/200 633/280 770/1 3634/12
PATH: 129/215 154/10 770/1 317/3 229/426