TID: Mystic BBS 1.12 A47   
   MSGID: 1:229/664 ffaca997   
   REPLY: 1:129/215 0a96d918   
   TZUTC: -0400   
   On 16 Sep 2021, g00r00 said the following...   
       
    g0> Even so, I'll still probably either make one of the following changes in   
    g0> Mystic's setup (open to opinions on which would be best if anyone has   
    g0> them):   
      
    g0> A: Uplink flag that you can set Yes/No" and then a "poll uplink" option   
    g0> B: Change it so that "Hold" export types will not poll in "poll forced"   
    g0> mode   
      
   I would vote for A and/or be able to specify more than address on the command   
   line with ./mis poll, e.g:   
      
   ./mis poll (address 1) (address 2) (address 3) etc   
      
   And when called like that it would poll any specified addresses simultaneity.   
      
      
   Jay   
      
   ... To remove dust from the eye, pull the eye down over the nose.   
      
   --- Mystic BBS v1.12 A47 2021/09/07 (Raspberry Pi/32)   
    * Origin: Northern Realms (1:229/664)   
   SEEN-BY: 1/123 90/1 105/81 120/340 123/131 129/305 221/6 226/30 227/114   
   SEEN-BY: 227/702 229/424 426 428 452 550 664 700 981 1017 240/5832   
   SEEN-BY: 249/206 307 317 400 282/1038 292/854 301/1 317/3 322/757   
   SEEN-BY: 342/200 633/280 770/1   
   PATH: 229/664 426