TID: Mystic BBS 1.12 A47   
   MSGID: 1:229/664 b3278156   
   REPLY: 1:105/10 611d1d8e   
   TZUTC: -0400   
   On 18 Aug 2021, Rick Smith said the following...   
       
    RS> paths in mystic cfg.. All works now. I do have a small issue, so say on   
    RS> my doors menu a user selects bbslink it then prints all the loading info   
    RS> across the screen and doesnt look that great until it loads. Is there a   
    RS> way to clear screen after a menu selection is pressed?   
      
   Are you using the bbslink.py script?   
      
   I edited mine a little bit to make it a bit faster & clean up the Output a   
   bit.  I just commented out these lines below the clear screen line:   
      
   os.system("clear")   
   #print "  BBSlink.net Linux connection client " + version + "\n  -=- Courtesy   
   of Sampsa Laine, B4BBS (2:250/7), http://sampsa.com/b4bbs  -=- "   
   #print " "   
   #print "  Connecting to BBSlink.net, please wait..."   
   #print " "   
   #time.sleep(2)   
      
      
   I still get the telnet connecting messages, but they're only there for a brief   
   moment before the door actually loads.   
      
      
   Jay   
      
   ... The most popular labour-saving device today is still a husband with money.   
      
   --- Mystic BBS v1.12 A47 2021/08/17 (Raspberry Pi/32)   
    * Origin: Northern Realms (1:229/664)   
   SEEN-BY: 1/123 19/10 90/1 105/81 120/340 123/131 129/305 153/757 154/10   
   SEEN-BY: 203/0 221/0 1 6 242 360 226/30 227/114 702 229/424 426 428   
   SEEN-BY: 229/452 550 664 700 981 1016 1017 230/0 240/5832 249/206   
   SEEN-BY: 249/307 317 400 280/464 5003 282/1038 292/854 301/1 317/3   
   SEEN-BY: 320/219 322/757 335/364 342/200 423/81 633/267 280 281 410   
   SEEN-BY: 633/412 414 416 509 640/1138 1321 1384 712/848 770/1 4500/1   
   PATH: 229/664 221/6 1 640/1384 633/280 229/426