INTL 3:770/1 3:770/3   
   REPLYADDR toddholcomb6@gmail.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <30c7ded0-7aca-408c-b560-752fdb42d49an@googlegroups.com> d32b9ebe   
   REPLY: 1:153/757.3 60f69ccb   
   PID: SoupGate-Win32 v1.05   
   On Tuesday, August 3, 2021 at 4:20:18 PM UTC-5, Al wrote:   
      
   > This can be an active vs passive mode issue.    
   >    
   > If the ftp server wants passive mode but your client is in active mode that   
   can    
   > happen. I can sometimes get past this in my classic ftp client by going into    
   > passive mode before doing a dir command. Try just entering "passive" without    
   > the quotes on the ftp command line before issueing any other commands like   
   dir.    
   >    
   > ftp is kind of a cranky protocol, that may or may not help but it's worth a    
   > try.   
      
   Thanks for the reply.  Everything works fine from modern command line, but the   
   vintage Fetch app doesn't allow you to enter any commands.  I'm guessing the   
   old app doesn't support passive mode so I tried switching the Passive Mode to   
   "No" in the FTP    
   server settings without any luck...   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/123 90/1 105/81 114/705 120/340 123/120 131 129/305 154/10   
   SEEN-BY: 220/70 226/17 30 100 227/114 702 229/101 424 426 428 452   
   SEEN-BY: 229/550 664 700 981 1016 1017 240/5832 249/206 307 317 400   
   SEEN-BY: 250/5 8 267/800 282/1038 292/854 298/25 301/1 305/2 3 317/3   
   SEEN-BY: 322/757 340/1000 342/200 633/280 712/848 770/1 3 100 340   
   SEEN-BY: 772/210 220 230   
   PATH: 770/3 1 317/3 229/426