MSGID: 1:153/757.3 dc4aa3ea   
   REPLY: 4:801/188 60c75672   
   TZUTC: -0700   
   CHARSET: LATIN-1   
   > I have Route Info configured as such:   
      
   > 4:90/1 -> 1:* 2:* 3:* 4:*   
   > 2:341/66 -> 2:341/*   
      
   > Under the above setup, all netmail towards 2:341 network is routed   
   > through 2:341/66.   
      
   > I would like to route all region 34 netmail (nets 341 and 343)   
   > towards 2:341/66, but my attempts to configure it have failed.   
      
   > For instance:   
      
   > Configuring 2:34*/* Route info -> Netmail to 2:341/206 is sent   
   > through 4:90/1 instead of 2:341/66   
      
   > Configuring 2:34* Route info -> Netmail to 2:341/206 is sent   
   > through 4:90/1 instead of 2:341/66   
      
   I would do it like this in the route info line for 4:90/1..   
      
   1:* 2:*!2:341/*!2:343/* 3:* 4:*   
      
   And this for 2:341/66..   
      
   2:341/* 2:343/*   
      
   I am not certain that is what you want and you'll want to check what that does   
   with "./mis route".   
      
   > I was looking at the wiki and there is not much detail regading   
   > the wildcards and how they should be applied...   
      
   It is on the wiki in the Networking -> EchoMail Nodes section.   
   --- BBBS/Li6 v4.10 Toy-5   
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.3)   
   SEEN-BY: 1/123 30/0 80/1 90/1 103/705 105/81 106/127 120/340 123/131   
   SEEN-BY: 129/305 134/100 153/105 757 802 154/10 218/700 221/1 6 226/30   
   SEEN-BY: 227/114 702 229/101 424 426 452 550 700 981 1016 1017 240/1120   
   SEEN-BY: 240/5832 249/206 307 317 400 261/38 280/464 282/464 1038   
   SEEN-BY: 292/854 301/0 1 101 113 317/3 322/757 335/364 341/66 342/200   
   SEEN-BY: 633/280 712/848 920/1 4500/1 5020/1042 5058/104   
   PATH: 153/757 221/6 301/1 229/426