TID: Mystic BBS 1.12 A46   
   MSGID: 3:770/100 f007c2ba   
   REPLY: 1:105/10.1 60936722   
   TZUTC: 1200   
   On 05 May 2021 at 08:48p, Rick Smith pondered and said...   
       
    RS> Greetings All!   
    RS>    
    RS> Is there somewhere to set default node?  I noticed sometime ago that my   
    RS> mystic always defaults to node 2,   
    RS> doesnt cause any problems really, just curious if there is a reason for   
    RS> it?   
      
   As far as I know you can't set a default node but what you can do is dictate   
   the total number available that then are in turn called upon from the number   
   you make available to the servers you opt to set up.   
      
   If when you telnet in to your BBS node 2 is always the first one reach, it   
   sounds like node one may be busy and not available. Running something like   
   nodespy and then selecting node one, then choose 'kill ghost' should clear it.   
      
   Hope that helps.   
      
   Best, Paul   
      
   --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)   
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (3:770/100)   
   SEEN-BY: 1/123 90/1 105/81 114/705 120/340 123/120 131 129/305 154/10   
   SEEN-BY: 220/70 226/17 30 100 227/114 702 229/101 424 426 452 550   
   SEEN-BY: 229/664 700 981 1016 1017 240/5832 249/206 307 317 400 250/5   
   SEEN-BY: 250/8 267/800 282/1038 292/854 298/25 301/1 305/2 3 317/3   
   SEEN-BY: 322/757 340/1000 342/200 633/280 712/848 770/1 3 100 340   
   SEEN-BY: 772/210 220 230   
   PATH: 770/100 1 317/3 229/426