TID: Mystic BBS 1.12 A47   
   MSGID: 1:227/702 36abab84   
   REPLY: 1:129/215 557d89c1   
   TZUTC: -0500   
    g0> You can do that but I don't think it would fix anything.  If you want   
    g0> the screen to pause in a scrolling ANSI it just needs to be saved with   
    g0> unlimited line length (0 in Mystic's ANSI editor) so each line in the   
    g0> actual ANSI file is one line as displayed.  If the cursor is moving   
    g0> around via location codes or auto wrapping, then the line count won't be   
    g0> accurate.   
      
   I thought you had mentioned not to use the Ansi Editor for a while until you   
   had it dialed in.  Maybe you had done so on the 11.6 update and/or saving   
   length at 0 would be ok to do .. I'll give it a shot for sure, thats normally   
   how I fix these issues.   
      
    g0> I could probably improve on this in the future, its just worked this way   
    g0> for 20+ years.   
    g0> I think most people turn pausing off for scrolling ANSIs and/or use baud   
    g0> rate emulation and in the few cases where the pause is desired it just   
    g0> has to be saved a certain way.   
      
   Yes setting a pipe code PO at the beginning normally fixes the issue also, but   
   did not in this case.   
      
    g0>    
    g0> I'll make a note of it in the TODO to look at changing the logic.   
      
      
   That would be awesome to see as well.   
      
   -tG   
      
   --- Mystic BBS v1.12 A47 2020/11/06 (Windows/32)   
    * Origin: The Underground [@] theunderground.us:10023 <-port (1:227/702)   
   SEEN-BY: 1/123 90/1 105/81 120/340 123/131 129/305 226/30 227/114   
   SEEN-BY: 227/702 229/101 275 424 426 452 550 664 981 1016 240/5832   
   SEEN-BY: 249/206 317 400 292/854 317/3 322/757 342/200 633/280   
   PATH: 227/702 229/426