TID: Mystic BBS 1.12 A47   
   MSGID: 1:129/215 e9be7424   
   REPLY: 1:227/702 60e2111c   
   TZUTC: -0500   
    DC> 1.  I didn't see anything in the readme.txt regarding using this with   
    DC> menus.  I'd love if Mystic could auto detect which terminal size was   
    DC> being used, and then display the appropriate menu (80x25 or 132x36).  I   
      
   Mystic does auto detect terminal sizes, and the latest version does allow   
   menus to be named the same as other display files and templates (for both   
   randomly selected menus, and menus dynamically selected based on either   
   columns, lines, or both)!   
      
   Download the latest and you should be good to go!   
      
    DC> 2.  I'm noticing the pause prompt still defaults to line 25, even if the   
    DC> 132 ansi is 35 lines in length, therefore pausing   
    DC> 2/3rds down, but within the ANSI file, instead of below it.  I'm using   
      
   If you have a display file that is not saved at unlimited line length then you   
   will have this issue, so that is my guess as to why you are seeing this.    
   Lines are counted by linefeeds saved in the actual file, so if you don't save   
   the ANSI with unlimited line length (ie ANSImation, etc) then it will not   
   accurately pause during display.   
      
   --- Mystic BBS v1.12 A47 2020/11/06 (Windows/64)   
    * Origin: Sector 7 | Mystic WHQ (1:129/215)   
   SEEN-BY: 1/123 90/1 103/705 120/10 340 123/131 124/5016 129/215 305   
   SEEN-BY: 154/10 30 40 50 700 203/0 220/80 221/0 6 226/30 227/114 201   
   SEEN-BY: 227/702 229/101 275 310 424 426 452 550 664 981 1016 240/1120   
   SEEN-BY: 240/5411 5824 5832 5853 6309 249/206 317 400 280/464 5003   
   SEEN-BY: 292/854 8125 317/3 320/219 322/757 342/200 396/45 633/280   
   SEEN-BY: 770/1 2452/250 2454/119 3634/12   
   PATH: 129/215 154/10 280/464 240/5832 229/426