Hello Andrew!   
      
   Monday March 16 2015 09:47, you wrote to me:   
      
    VC>> I am sending file to a downlink that for reasons only he knows is   
    VC>> then sending them back to me.   
      
    VC>> He is set to only receive them so mbse rejects them BUT it leave   
    VC>> them in the var/inbound and does not move them to var/badtic   
      
    VC>> OR have I a incorrect setting somewhere?   
      
    > When I have a few moments I'll look at the .TIC processing code and   
    > see if I can figure out your issue.  Nothing has changed in that   
    > regard between 1.0.4 and 1.0.5, so I should be able to reproduce it   
    > fairly easily if there is a bug.   
      
   Using v1.0.4, and I suspect it has been present way before 0.92 :(   
      
   He is the first downlink who can not set up his system to prevent it (or does   
   not know how to) so making sure mbse deals with it is the next best solution.   
      
   If you have the time? can you take a look at the way mbse deals with setting    
   up   
   or amending a users password (both new and existing)?   
      
   On my system, since changing from Mandriva 2011 (and previous versions) to   
   Mageia v4 (and v3) when a new user telnet's in s/he can only get as far as   
   entering a password then it fails by saying that the file (shadow) is busy.   
      
   I suspect that the procedure is out of date for modern Linux kernels and   
   password procedures etc.  This stops my system from accepting any new users or   
   allowing an existing one to modify their password, not that I would assume    
   that   
   my system would be swamped with new users :)   
      
   It does get as far as setting up new users home directory, Linux user account   
   then fails to continue with any further processing in the matter including   
   setting up the account in mbse itself.   
      
   I did take a look at the code and did a dirty change by creating a dummy    
   passwd   
   of 12345 but did not make much of an improvement however I do not recall   
   continue to play with just the Linux account setup to include the password but   
   that does not fix the problem if you cannot change it at any point later.   
   So a silly test really.   
      
      
   Vince   
      
   --- Mageia Linux v4/Mbse v1.0.4/GoldED+/LNX 1.1.5-b20130910   
    * Origin: Air Applewood, The Linux Gateway to the UK (2:250/1)