=============================================================================   
   * Forwarded by Vince Coen (2:250/1)   
   * Area : BINKD (The ubiquitous BinkD TCP/IP FTN mailer a)   
   * From : Michiel van der Vlist, 2:280/5555 (Friday February 28 2014 12:54)   
   * To   : Vince Coen   
   * Subj : Error 10054   
   =============================================================================   
   Hello Vince,   
      
   On Thursday February 27 2014 23:33, you wrote to me:   
      
    VC> My apologies for 'assuming'  it has been many years since I have had a   
    VC> need to look at this setting that I totally forgot about it.   
      
    VC> It what happens when the system just works (well, normally).   
      
   Yeah, that sounds familiar.  ;-)   
      
   Ok, so we have found a work around. So far so good. What remains is the    
   question   
   why binkd thinks mbicico is in 1.1 mode when the sysop has forced it in 1.0   
   mode.   
      
   Is mbcico sending the wrong signal or is binkd misreading mbcico's signal?   
      
   It is my understanding that you are the present maintainer of MBSE. Could you   
   have a look at it?   
      
      
   Cheers, Michiel   
      
   -!- GoldED+/W32-MINGW 1.1.5-b20110320   
    ! Origin: http://www.vlist.eu (2:280/5555)   
      
   =============================================================================   
      
   Hello All!   
      
   FYI   
      
      
   Vince   
      
   --- Linux/Mbse/GoldED+/LNX 1.1.5-b20120229   
    * Origin: Air Applewood, The Linux Gateway to the UK (2:250/1)