MSGID: 1:18/200 625ccf38   
   CHRS: UTF-8 2   
   TZUTC: -0400   
   TID: MBSE-FIDO 1.0.8 (Linux-x86_64)   
   Hello All,   
      
   The display issue has been fixed and I have verified it by updating my MBSE    
   system here.   
      
   You can upgrade your system to fix this:   
      
   - Stop MBSE on your system.   
      
   - Delete your current /opt/mbse/mbsebbs-code directory if you have one.   
      
   - Make sure git is installed then run:   
     git clone https://git.code.sf.net/p/mbsebbs/code mbsebbs-code   
      
   - Change to the mbsebbs-code directory and run these commands:   
      
     ./configure   
     make   
     su (do not use "su -")   
     make install   
      
   - Restart the BBS.   
      
   We, the dev team, apologize for this oversight on our part.  We would like to    
   thank Harald for bringing this to our immediate attention.   
      
   -- Sean   
      (speaking on behalf of the MBSE BBS Dev Team)   
      
   ... Learning is a treasure which will follow its owner everywhere.   
   --- GoldED+/LNX 1.1.5-b20180707   
    * Origin: Outpost BBS (MBSE BBS Dev Team) (1:18/200)   
   SEEN-BY: 1/110 123 15/0 18/200 90/1 105/81 106/201 120/340 123/131   
   SEEN-BY: 129/305 330 331 153/7715 218/700 226/30 227/114 229/110 111   
   SEEN-BY: 229/206 317 400 424 426 428 452 550 664 700 266/512 282/1038   
   SEEN-BY: 292/854 317/3 320/219 322/757 342/200 396/45 460/58 633/280   
   SEEN-BY: 712/848   
   PATH: 18/200 229/426